Proprietary blend of acrylic copolymers, calcium carbonate and inorganic materials.
AcrylPro® Ceramic Tile Adhesive is a high performance, professional formula adhesive with the high bond strengths required for 8" x 8" (20 x 20 cm) ceramic floor tile installations; can be used with tile up to 18” x 18” (45 x 45 cm) but dry time significantly increases. Suited for ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile on walls or floors, AcrylPro provides maximum resistance to intermittent water exposure.For detail technical specifications from manufacturer, refer to this document
Technical Data Sheet
|For detail technical specifications from manufacturer, refer to this document|
|Uses|| Recommended to bond ceramic, mosaic, quarry tile, slate, porcelain and stone tiles up to 8x8 in (20x20 cm) for interior use only. Can be used with tile up to 18x18 in. (45x45 cm), but dry time significantly increases. If dry time is a concern due to tile size or the installation situations listed below, a traditional polymer modified thin-set mortar is recommended.
Suitable for wet areas such as tub surrounds ans shower walls. Do not use in stream rooms, shower floors or underwater. Do not use to install fixtures, tile with lugs on floors, Saltillo pavers, moisture-sensitive natural stone, white translucent or resin-backed marble.
|Suitable Substrates|| • Concrete, mortar beds, masonry, Portland cement plaster |
• WonderBoard® Lite, cement backerboards
• Exterior Grade Plywood (EGP) - interior residential and light commercial dry areas
• Gypsum wallboard (interior dry areas)
• Existing ceramic tile
• Fully-bonded sheet vinyl flooring
• Plastic laminates
• Cutback adhesive (see preparation instructions)